The genius trick to clean and deodorize toilets for a month

Cleaning the toilet can be a daunting task but unavoidable, especially if you have a heavily calcified bowl and a toilet seat that has yellowed from use. However, it is possible to find sparkling white toilets in a short time and without much effort. Discover how to remove yellow stains from the bottom of the bowl with these 3 natural and economical products. Over time and with use, toilets become larger. The bottom of the container is covered in unsightly yellow or brown spots, which can also cause foul odors. However, there are simple and effective tips to clean the toilet and keep the bowl always clean and white.

Why does the bottom of the bucket turn yellow?

Toilet water is hard water, also called hard water. In fact, it is rich in minerals such as calcium and magnesium, which are responsible for the formation of limestone. If this water stagnates in the container, it promotes the formation of limescale deposits. These unsightly yellow or brown spots are limescale deposits.

Remember that limescale not only gets into our toilets, but also into all of our appliances that use hard water. Limescale deposits  are not only unsightly, but also lead to excessive energy consumption.

How do I find a white bowl?

To remove the yellow stains that cover the walls of the bowl, three ingredients come into play: baking soda, white vinegar and salt.

Remember that limescale not only gets into our toilets, but also into all of our appliances that use hard water. Limescale deposits  are not only unsightly, but also lead to excessive energy consumption.

How do I find a white bowl?

To remove the yellow stains that cover the walls of the bowl, three ingredients come into play: baking soda, white vinegar and salt.

Generously sprinkle baking soda on the sides and bottom of the container. Then sprinkle the salt over the same baking soda covered areas. Let it sit for a few minutes and pour the white vinegar over the stained areas. Leave it on for an hour to allow the mixture to work better on the tartar deposits. Then scrub the yellow stains with the toilet brush and flush the toilet

What cleaning properties do these products have?

Baking soda    : This multi-purpose product effectively cleans, degreases and neutralizes bad odors. It is also    a natural stain remover with whitening properties   . Baking soda is therefore a natural bleaching agent that you    can use to clean and whiten the toilet bowl.

White Vinegar:    White vinegar is used in cooking to season salads and is also very effective in cleaning. In fact, it is composed of acetic acid, which gives it a cleaning and disinfecting effect. The acidity of vinegar also helps kill bacteria and dissolve dirt, grease and limescale deposits. For this reason, white vinegar is    a natural limescale remover, useful for removing deposits at the bottom of the container.

Sal:    He also takes part in the maintenance of the house. In fact, it is used to clean and degrease surfaces but    also to remove stuck stains thanks to the abrasive action of its grains.

What other surfaces can be cleaned?

With these three products you can not only remove limescale and yellowing from the bowl, but also clean all surfaces of the toilets and bathroom.

Toilet seat:    Like the bowl, the seat also tends to yellow. To shine, sprinkle baking soda on the stains and rub with a slightly damp microfiber sponge. The abrasive crystals in the baking soda loosen yellow stains. Then soak a clean cloth with a little white vinegar and wipe the bezel to disinfect it.

Faucets and sinks:    To remove white limescale from faucets and sinks, sprinkle them with baking soda. Next, soak a sponge with Marseille soap and salt and scrub the faucets and sinks to make them shine.

Shower cubicle:    Limescale stains and soap residue quickly dirty the shower wall. To clean your shower stall, mix a cup of baking soda with a little water to make a paste that you spread on the walls of the shower stall. Leave it on for a few minutes and    rub it off with a sponge   . Then wipe the walls with a cloth soaked in white vinegar to remove any limescale residue. If the stains are harder to remove, add some salt to your baking soda paste to make it more abrasive.

With these 3 natural and easily accessible products you can clean not only your crusty sink but your entire bathroom to restore whiteness and shine.